Yokogawa YFGW710 - Manual (Page 88)

B1-24
IM 01W01F01-01EN
B1.2.4.2 Downloading to YFGW710
To write the provisioning information to YFGW710, click on [Tools] – [Download] in the menu in
the Main window of Field Wireless Configurator to display the [Download Project Data] window.
Figure B1-7 Download Project Data Dialog Box
The check boxes for the information to be downloaded are automatically checked in the [Data to
Download] field on the left in the [Download Project Data] window.
When performing a download for the first time after creating a project database, the check boxes
for all the items are checked. Clear the check mark from [Devices] and click the [Start download]
button. Downloading to the YFGW710 specified in [IP Address] in the [Connection Informa-
tion] field is performed. Note that YFGW710 automatically restarts once during the download to
YFGW710.
For details on the procedure, refer to C2, “Field Wireless Configurator” in Part C of this document.
l When the Start download button is clicked while the Devices check box is
checked:
When the download to YFGW710 is completed and YFGW710 automatically restarts, the down-
load to the field wireless devices whose check boxes are checked is performed.
However, since YFGW710 automatically restarts, the field wireless devices are disconnected
once from the field wireless network. After YFGW710 automatically restarts, the field wireless
devices join the field wireless network one after another.
Field Wireless Configurator waits for a maximum of three minutes until the field wireless devices,
to which the download is performed, join the field wireless network. The download is not per-
formed to field wireless devices that did not join the field wireless network within three minutes.
The check boxes for the field wireless devices to which the download was not performed are
checked. In such a case, refer to section B1.2.7, “■ Countermeasures against Download Error”
and take the appropriate countermeasure.