Yokogawa YFGW710 - Manual (Page 182)

C3-28
IM 01W01F01-01EN
l Read Object Attribute
This command is only available for field wireless devices and enables you to read object at-
tributes of the selected device.
To issue the command:
1) Click on the [Read Object Attribute] button.
2) At the Read Object Attribute window, enter the TSAP ID, object ID, and atribute ID, and click
[OK].
Figure C 3-27
The Command Results window will display the value of the attribute read in the Response sec-
tion.
Figure C 3-28