Yokogawa YFGW710 - Manual (Page 190)

C3-36
IM 01W01F01-01EN
To search for commands, enter the device tag or part of the tag in the Device Tag input field, then
click . The results will be displayed in a table as shown in the screen above, with the following
information for each command:
• Tracking Number : internal ID of command
• Device Tag
• EUI-64 address: Device unique 64bits address
• Command: Name of executed command
• Parameters: Description of parameters chosen for the command, if applicable
• Status: Current status of the command
• Time Posted: Date and time when the command was generated
• Time Response: Date and time when the command was responded successfully or not
• Response: Response for the issued command if the command responded successfully or
the error reason if the command failed
Double-clicking on a line in the table will open the Command Results window for that command.
The commands generated automatically by the system are hidden by default. To view them,
check the [Show system generated commands] checkbox in the Command Log tab page and
click .
If the listed commands exceed the current page, paging controls at the bottom of the grid allow
you to navigate through different pages of the search results.
From this page you can also export the search results to CSV format files for later use, by clicking
.