Yokogawa YFGW710 - Manual (Page 151)

C2-30
IM 01W01F01-01EN
C2.3.4.7 Modifying the Modbus Register Map
1. Open a working project in Field Wireless Configurator;
2. Select and click a network in the networks tree in the left pane (Project Sections) of the main
window.
3. In the right pane, proceed to the Modbus Configuration tab page;
4. Change the register map using a drag-and-drop operation from the Available/Sampling
Parameters field to the Input Register field (Holding Registers are not supported). You can
edit the start/end addresses for an existing register by double-clicking on it and entering new
values in the Edit Modbus Register window. If you want to delete a register, click on it and
press the Delete key. You will be prompted for confirmation.
5. Go to menu Tools – Download. Download Project Data window appears. The Modbus Reg-
ister Map and Pub/Sub Connection in the Data to download field should be checked.
6. Press the [Start download] button to make sure your network configuration is updated. The
Download Progress window appears.
7. Wait for download to end. When the download completes, the [Save to file] button will be
enabled.
C2.3.5 Users
Users may have access to all or limited Field Wireless Configurator functionalities depending on
their role.
A role consists in a set of rights allowing a user to make various operations in the system. There
are three defined roles, and the access to certain sections of the web interface varies depending
on the role assigned to the user.
l Administrator
This role gives the user full control over the system and includes the other roles; an Administrator
can create, edit, or download project data, set application options, and manage user accounts.
l Power User
The Power User can create, edit, or download project data, set application options, but cannot
manage user accounts.
l Regular User
Regular User can create or edit project data, but cannot download; neither set application options
nor manage user accounts.