Yokogawa YFGW710 - Manual (Page 71)

B1-7
IM 01W01F01-01EN
• PC2
FieldMate R2.03.00 or later
To set and adjust device parameters in field wireless devices before installation, install Field-
Mate R2.03.00 or later.
First, install FieldMate according to the instructions in the following user's manual.
IM01R01A04-01 FieldMate Device Adjustment and Setting Software
Simple Start Manual
IM01R01A04-01 FieldMate Device Adjustment and Setting Software
l Preparation for Capabilities File and Device DTM
Obtain Capabilities File and Device DTM of the field wireless device that is connected to the wire-
less network. Capabilities File and Device DTM are provided by the field wireless device vender.
Ask the field wireless device vendor how to obtain them. For Yokogawa field devices, visit the
following web site to download the necessary files.
< http://www.field-wireless.com/ >
When using PRM or FieldMate, visit and check the following web site for the applicable setting
tool and DeviceFiles revision.
< http://www.field-wireless.com/ >
- For PRM R3.05 or later, use the DeviceFiles included in the package or download the
appropriate DeviceFiles from the PRM user’s site.
- For FieldMate R2.03 or later, use the DeviceFiles included in the package or download the
appropriate DeviceFiles from the FieldMate user’s site.
- Use PRM R3.10 or later and FieldMate R2.04 or later for YTMX580 multi-input temperature
transmitter.
B1.2.2 Field Wireless Network Offline Engineering
The task of the field wireless network offline engineering is performed using Field Wireless Con-
figurator in the following steps.
• Creating a Project Database
• Registering YFGW710
• Registering a Field Wireless Device
• Loading a Capabilities File (CF)
• User Application Engineering
B1.2.2.1 Creating a Project Database
Create a project database using Field Wireless Configurator. For details on the procedure, refer
to C2, “Field Wireless Configurator” in Part C of this document.