Yokogawa ADMAG AXR - Manual (Page 102)

<7. OPERATION VIA BRAIN TERMINAL (BT200)>
7-8
IM 01E30D01-01EN
7.3.3 BT200 Setting of Alphanumeric-Type Data: Tag number
In this example, the tag number specified by the alphanumeric-type parameter C10: TAG NO is changed from
“FI-1101” to “FI-1201.”
The highlighted data will
begin to flash on and off:
Press the key
once again to confirm your
entry.
In case of cancel, press the
( ) key.
F0711.ai
X 4
When the flashing under-
score (small cursor) has
been moved to the position
for multiples of 100, use the
alphanumeric keys to enter
the value “2”. (When this
value has been entered, the
underscore will move to the
position for multiples of 10.)
When the tag number has
been corrected to “FI-1201”
in this way, press the
key.
MENU
A:DISPLAY
B:EASY SETUP
C:BASIC SETUP
D:TOTAL SET
E:PULSE SET
F:STATUS FUNC
HOME SET ADJ ESC
MENU
A:DISPLAY
B:EASY SETUP
C:BASIC SETUP
D:TOTAL SET
E:PULSE SET
F:STATUS FUNC
HOME SET ADJ ESC
PARAM
C10:TAG NO
FI-1201
C11:FLOW DAMPING
5.0s
C20:LOW MF(IEL)
1.0000
DATA DIAG PRNT ESC
SETTING
C10:TAG NO
FI-1201
FEED NO OK
SETTING
C10:TAG NO
FI-1101
FI-1101
CODE CAPS CLR ESC
SETTING
C10:TAG NO
FI-1101
FI-1201
CODE CAPS CLR ESC
SETTING
C10:TAG NO
FI-1101
FI-1201
FEED POFF NO
PARAM
C10:TAG NO
FI-1201
C11:FLOW DAMPING
5.0s
C20:LOW MF(IEL)
1.0000
DATA DIAG PRNT ESC
OK ( )
An underscore (small
cursor) will start to flash on
and off at the furthest left
character in the tag number
as displayed in the
data-overwrite section.
Press the key four
times to move the flashing
underscore (small cursor) to
the position for multiples of
100.
When the cursor has been
moved to C: BASIC SETUP,
press the key to
access Parameter Screen
(Sub-Item Parameter
Search Mode).
When Menu Screen (Major
Item Parameter Search
Mode) has been entered as
shown here, press the
key twice to move
to C: BASIC SETUP.
The changed setting for tag
number can now be
confirmed.
Press the ( ) key
to return to Menu Screen
(Major Item Rarameter
Search Mode).
ESC
The cursor will already be
aligned with C10: TAG NO.
Press the key to
access Setting Screen
(Parameter Replacement
Mode).
NO
The tag number has been
changed to “FI-1201”.
Press ( ) key to
exit Setting Screen
(Parameter Replacement
Mode), and then the display
returns to Parameter
Screen (Sub-Item
Parameter Search Mode) of
Menu C items.
In case of redo of setting,
press the ( ) key
to return the Setting Screen
(Parameter Replacement
Mode).
OK
NO