Navigating using the keyboard keys – ADTRAN 600R User Manual
Page 47
Total Access 600 Series System Manual
Section 4 User Interface Guide
61200624L1-1B
© 2004 ADTRAN, Inc.
45
Additional Terminal Menu Window Features
•
Mode – displays the network interface mode of the unit (for example, T1 IAD, SHDSL IAD, SDSL
IAD, ADSL IAD)
•
L2 Status – displays the current status of the L2 protocol (ATM sync is either up or down) – ATM Only
•
DS0 Mapping – displays the current mapping of DS0s in the system. DS0s mapped to the router
display r, unmapped DS0s display –, and all other DS0s display *.
•
Tool Tip – provides a brief description of the currently selected mode.
•
Slot Status – displays type of module installed in each slot. No entry will appear for slots not containing
a module.
•
Telnet Info – displays the user name when connected via Telnet. This information is not displayed when
connecting to the system via the
CRAFT
interface.
•
Ethernet Link Status – displays the current status of the integrated Ethernet interface (located on the rear
of the chassis).
•
Extended Help – displays information about selected commands <
CTRL+A
>.
•
Navigation Help – lists characters used for navigating the terminal menu and session management
<
CTRL+Z
>.
•
Config Status – displays * when current configuration contains changes that have not been saved to
flash memory. Save changes by backing out to the main menu, or press
save.
Navigating using the Keyboard Keys
You can use various keystrokes to move through the terminal menu, to manage a terminal menu session,
and to configure the system. Press
keystrokes.
Moving through the Menus
To do this...
Press this key...
Return to the home screen
H
Jump between two menu items
Press
main screen.
Go to another menu item, press
displayed the first time you pressed
Press
J
Select items
Arrows
Edit a selected menu item
Enter
Cancel an edit
Escape
Close pop-up help screen
Escape
Move between the left and right panes
Tab
Arrows
Move to the top of a screen
A