ADTRAN 600R - Manual (Page 201)

61200624L1-1B © 2004 ADTRAN, Inc. 199
DLP-6 Adding/Removing Users and Changing Password Security
Levels
Introduction
All menu items in the Total Access 6XX are protected by passwords of varying security levels. By
assigning different passwords to different security levels, the Total Access 6XX System Administrator can
control which users can view or change various menu items. You can assign multiple passwords at the
same access level. This way, different users with the same access privileges can have different passwords.
This procedure details the steps which must be performed to add/remove user profiles and assign password
security levels in the Total Access 6XX.
Tools and Materials Required
• VT100 compatible terminal or PC with VT100 terminal emulation software
Password security levels only apply to users connecting to the Total Access 6XX system
through Telnet access. All connections made through the
CRAFT interface ALWAYS have
maximum security rights.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place equipment in antistatic packing material when transporting or storing.
When working on equipment, always place it on an approved antistatic mat that is
electrically grounded.