ADTRAN 600R User Manual
Page 131

Total Access 600 Series System Manual
Section 4 User Interface Guide
61200624L1-1B
© 2004 ADTRAN, Inc.
129
R
OUTER
> C
ONFIG
> DHCP S
ERVER
> DHCP S
ERVER
Use this menu to enable the DHCP server (
O
N
or
O
FF
).
R
OUTER
> C
ONFIG
> DHCP S
ERVER
> DHCP A
DDRESS
P
OOLS
Configures the parameters for the various defined DHCP address pools. Multiple DHCP address pools
may be defined using these menus.
N
UM
Displays the index number of the defined DHCP address pools. Multiple address pools are valid, and
all will be listed in sequential order. This number is for reference only.
N
AME
Enter a user-defined alphanumeric text string for the defined DHCP address pool. This text string is
for easy identification and reference only.
T
YPE
Configures the DHCP address pool as either a Network or Host pool.
L
EASE
C
ONFIG
Configures the lease duration for an IP address from this pool assigned by the DHCP server to a host
on the network.
L
EASE
D
AYS
, H
OURS
, M
INUTES
Defines the lease duration (in days, hours, and minutes) for an IP address from this pool assigned
by the DHCP server to a host on the network.
N
ETWORK
A
DDRESS
Defines the network address for the configured address pool (for example, 172.24.0.0). The
N
ETWORK
A
DDRESS
and
N
ETWORK
M
ASK
determine the number of addresses available on the
network for the configured pool.
N
ETWORK
M
ASK
Defines the network mask associated with the network address for the configured address pool
(for example, 255.255.0.0). The
N
ETWORK
A
DDRESS
and
N
ETWORK
M
ASK
determine the number
of addresses available on the network for the configured pool.
P
OOL
I
NFO
Configures various network parameters assigned to all hosts given an IP address from the configured
address pool.