ADTRAN 600R - Manual (Page 150)

Section 4 User Interface Guide Total Access 600 Series System Manual
148 © 2004 ADTRAN, Inc. 61200624L1-1B
S ECURITY > R ADIUS S ERVER
The parameters for the R ADIUS S ERVER
are configured in this menu.
S ECURITY > R ADIUS S ERVER > S ERVER 1
This is the IP address of the first R ADIUS S ERVER
that the unit should attempt to communicate with when
authenticating a Telnet session. Default is 0.0.0.0 .
S ECURITY > R ADIUS S ERVER > S ERVER 2
This is the IP address of the second R ADIUS S ERVER
that the unit should attempt to communicate with when
the primary server does not respond. Default is 0.0.0.0 .
S
ECURITY
> R
ADIUS
S
ERVER
> S
ERVER
3
This is the IP address of the third R ADIUS S ERVER
that the unit should attempt to communicate with when
the primary server does not respond. Default is 0.0.0.0 .
S
ECURITY
> R
ADIUS
S
ERVER
> UDP P
ORT
This is the UDP port the unit should use when communicating with the R ADIUS S ERVER
. The default is
1812 , which the commonly used port.
S
ECURITY
> R
ADIUS
S
ERVER
> S
ECRET
The R ADIUS S ERVER
and unit share this text string. It is used by the R ADIUS S ERVER
to authenticate the unit,
the RADIUS client. The factory default is not to use a secret.
F ILTER L IST N AME
Selects between filters defines in the list. Default is no entry in filter list name.
N EXT O PER
The next operation to use to combine with the next filter in the list (default is E ND
):
END the last filter to combination.
AND logically AND this filter with the next filter in the list.
OR logically OR this filter with the next filter in the list.
H IT C OUNT
Displays the number of packets that have matched the criteria for the defined filter.
Telnet radius is only available in A.04 firmware or later.