IEI Integration eKINO-945GSE v1.01 - Manual (Page 92)

eKINO-945GSE Motherboard
Page 76
Quantity Type
1 Power cable
1 Dual RS-232 cable
Table 5-10: IEI Provided Cables
Some optional items that can be purchased separately and installed on the
eKINO-945GSE include:
ƒ Dual port USB cable
ƒ Parallel port cable
ƒ RS-232/422/485 cable
ƒ ATX power cable
ƒ HDTV out cable
5.9.1 ATA Flat Cable Connection
The ATA 66/100 flat cable connects to the eKINO-945GSE to one or two IDE devices. To
connect an IDE HDD to the eKINO-945GSE please follow the instructions below.
Step 4: Locate the IDE connector. The location/s of the IDE device connector/s is/are
shown in Chapter 3.
Step 5: Insert the connector. Connect the IDE cable connector to the onboard
connector. See
9
Figure 5-5. A key on the front of the cable connector ensures it
can only be inserted in one direction.