IEI Integration eKINO-945GSE v1.01 - Manual (Page 36)

eKINO-945GSE Motherboard
Page 20
The six USB ports implemented on the eKINO-945GSE are connected to three internal
connectors and one external connector shown in Figure 2-5.
2.6 LPC Bus Components
The iTE IT8718F LPC bus is connected to components listed below (and shown in
Figure 2-5):
ƒ BIOS chip
ƒ Super I/O chip
ƒ Serial port chip
2.6.1 BIOS Chipset
The BIOS chipset has a licensed copy of AMI BIOS installed on the chipset. Some of the
BIOS features are listed below:
ƒ AMI Flash BIOS
ƒ SMIBIOS (DMI) compliant
ƒ Console redirection function support
ƒ PXE (Pre-boot Execution Environment) support
ƒ USB booting support
2.6.2 iTE IT8718F Super I/O chipset
The iTE IT8718F Super I/O chipset is connected to the Intel® ICH7M Southbridge through
the LPC bus. The iTE IT8718F is an LPC interface-based Super I/O device that comes
with Environment Controller integration. Some of the features of the iTE IT8718F chipset
are listed below:
ƒ ACPI and LANDesk Compliant
ƒ Enhanced Hardware Monitor
ƒ Fan Speed Controller
ƒ Two 16C550 UARTs for serial port control
ƒ One IEEE 1284 Parallel Port
ƒ Keyboard Controller
ƒ Watchdog Timer