IEI Integration eKINO-945GSE v1.01 - Manual (Page 39)

eKINO-945GSE Motherboard
Page 23
Voltage inputs on the eKINO-945GSE Super I/O Enhanced Hardware Monitor monitors
the following voltages:
ƒ CPU Core
ƒ +1.05 V
ƒ +3.30 V
ƒ +5.00 V
ƒ +12 V
ƒ +1.5 V
ƒ +1.8 V
ƒ +5 VSB
ƒ VBAT
The values for the above environmental parameters are all recorded in the BIOS
Hardware Health Configuration menu.
2.7.2 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the eKINO-945GSE are listed
below.
ƒ Minimum Operating Temperature: 0ºC (32°F)
ƒ Maximum Operating Temperature: 60°C (140°F)
A cooling fan and heat sink must be installed on the CPU. Thermal paste must be
smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks
are also mounted on the Northbridge and Southbridge chipsets to ensure the operating
temperature of these chips remain low.
2.7.3 Power Consumption
8
Table 2-2 shows the power consumption parameters for the eKINO-945GSE running with
a 1.60 GHz Intel® Atom™ with 2.0 GB DDR2 memory.