Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 78)

WaveStation
72 922700-00 Rev A
Transfer waveform files to WaveStation by selecting Communication →
Send wave from the menu bar or, click the Send wave button on the lower
interface.
The Send wave pop-up is then shown. Select one of the 10 ARB waveform
bank locations for saving your waveform (from the Store location control)
and exactly which waveform for saving to WaveStation (from the Name
control) and click the Send button.
NOTE: When you save a Data (Arbitrary Waveform) to a Bank/File location already
containing previously stored information, your new information always overwrites
the old.