Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 29)

Operator’s Manual
922700-00 Rev A 23
B
PLEASE NOTE THE FOLLOWING:

Press the Amplitude/HLevel operation button a second time to select
and adjust the HLevel (High Level) parameter in the same manner.
Second operation button press parameters are shown in reverse color
on the waveform detail dialog to provide a visual indication as to which
parameter is being adjusted.

When using the Number Buttons to edit certain parameters, applicable
unit(s) are shown on the adjacent Units menu. Press a Unit menu button
to select the desired unit for your entry. These units do not appear if you
use the Adjustment Control knob to edit parameter settings.

Provide your desired Amplitude or HLevel using the Digital Input Front
Panel Controls.
Offset/LLevel
With the Sine waveform and the Offset/LLevel operation button pressed
once to select Offset, a Sine waveform is shown on the Waveform Display
and the Offset is shown on the Waveform Detail dialog.