Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 58)

WaveStation
52 922700-00 Rev A
Utility
NOTE: See Combined Use of Waveform, Function, and Configuration Buttons (on
page 17).
Main Utility Operations
The first step when using Utility is to press the corresponding Utility
function button on the Front Panel.
After pressing the Utility button on the Front Panel, select the desired
function using the corresponding Display Menu Operation buttons.
While details around the Utility operations are covered here, the following
section covers some menu control considerations.
For more information on getting to this point, see Navigating Interfaces,
Adjusting Parameters, and Making Selections (on page 11).
Common Util Menu Controls and Considerations
A good portion of the operation buttons control two separate parameters.
Operation buttons controlling two parameters have additional, lighter
shaded function labels on them; press the button once to adjust the top
control parameter; twice to adjust the bottom one. Make adjustments
using the Digital Input Front Panel Controls.
Second operation button press parameters are shown in reverse color on
the waveform detail dialog to provide a visual indication as to which
parameter is being adjusted in the detail dialog.
Some parameters look like they're first/second press shared and really are
not. Instead the parameter title is shown in the top portion and the lower
portion displays the particular parameter selection.
Some operation menus contain more parameters than the ones showing
on the first menu. When this is the case, a 1/X ↓ final selection is
provided. The additional menu(s) therefore have a 2/X ↑ first selection.
Press the adjacent button to navigate additional menu(s) and parameter(s)
as desired.