Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 11)

Operator’s Manual
922700-00 Rev A 5
B
Cleaning
Clean only the exterior of the instrument using a damp, soft cloth. Do not
use harsh chemicals or abrasive elements. Under no circumstances
submerge the instrument or allow moisture to penetrate it. Avoid electric
shock by unplugging the power cord from the AC outlet before cleaning.
CAUTION. Do not attempt to clean internal parts. Refer to qualified
service personnel.
Calibration
The recommended calibration interval is one year. Calibration should be
performed by qualified personnel only.
CAUTION. It is required that all inputs be removed from the
WaveStation prior to performing a manual calibration.
Schedule an annual factory calibration as part of your regular maintenance.
Extended warranty, calibration, and upgrade plans are available for
purchase. Contact your Teledyne LeCroy sales representative or
[email protected] to purchase a service plan.
Power
Power Consumption
50 VA (50 W) Max
Power and Ground Connections
100-240 VAC (±10%) at 50/60 Hz (±5%) or 100-120 VAC (±10%) at
400 Hz (±5%)
Automatic AC voltage selection. No manual voltage selection is required
because the instrument automatically adapts to line voltage.
The AC inlet ground is connected directly to the frame of the instrument.
For adequate protection again electric shock, connect to a mating outlet
with a safety ground contact.