Save/recall, utility, and help function buttons – Teledyne LeCroy WaveStation Waveform Generator Operators Manual User Manual

Page 24

Text mode
Original mode

WaveStation

922700-00 Rev A

The menu behavior/relationship looks like the following:

Save/Recall, Utility, and Help Function Buttons

Also mentioned in Initial Function Settings (on page 16), while the
waveform type and an optional signal conditioning function is (or is
not) applied to your signal, you can also use one of the Save/Recall, Utility,
or Help function buttons.

So, at any given time, you can press the Save/Recall, Utility, or Help
function button, and the corresponding menu is shown. Similar to Mod,
Sweep, or Burst these buttons are optional and a second press turns off
their corresponding LED and function to reveal either the Mod, Sweep, or
Burst menu if applied to the selected waveform, otherwise, the selected
waveform type menu is shown.