beautypg.com

Back panel – Teledyne LeCroy WaveStation Waveform Generator Operators Manual User Manual

Page 15

background image

Operator’s Manual

922700-00 Rev A

9

B

NOTE: It's important to understand the relationship between the Main Waveform
Type buttons, the Waveform Signal Conditioning function buttons, and the
Save/Recall, Utility, and Help function buttons. See Combined Use of Waveform,
Function, and Configuration Buttons (on page 17).

Back Panel

1. Input and Output BNC Connectors - Four BNC Connectors provide 10

MHz In, Modulation In, Synch Out, Ext Trig/Gate/Fsk/Burst Out.

2. USB Connector - USB 2.0 connector which is used for making USBRAW

or USBTMC connections as explained in WaveStation PC Software
Overview (on page 64) and Controlling WaveStation with USB-GPIB
and/or USBTMC (on page 62), respectively.

3. Ground Connector

4. AC Power Connector

See also other documents in the category Teledyne LeCroy Equipment: