Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 31)

Operator’s Manual
922700-00 Rev A 25
B
Phase/EqPhase
With the Sine waveform and the Phase/EqPhase operation button pressed
once to select Frequency, a Sine waveform is shown on the Waveform
Display and the Phase is shown on the Waveform Detail dialog.
PLEASE NOTE THE FOLLOWING:

Press the Phase/EqPhase operation button a second time to select and
adjust the EqPhase parameter in the same manner. Second operation
button press parameters are shown in reverse color on the waveform
detail dialog to provide a visual indication as to which parameter is being
adjusted.

When using the Number Buttons to edit certain parameters, applicable
unit(s) are shown on the adjacent Units menu. Press a Unit menu button
to select the desired unit for your entry. These units do not appear if you
use the Adjustment Control knob to edit parameter settings.

Provide your desired Phase or EqPhase using the Digital Input Front
Panel Controls.