Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 64)

WaveStation
58 922700-00 Rev A
LED Test
o Press the SelfCal option button and the WaveStation starts
a series of calibration tests as a progress bar is shown on
the Display Dialog indicating the percentage of completion.
When the progress reaches 100%, press any key to
continue.
o The Cancel option button may also be pressed and returns
you to the 2/2 main Util menu.

EditInfo - Press this option button and a WaveStation firmware
version details screen is shown and contains details for Boot-Strap
Number, Software Version, Hardware Version, Model Number, and
Serial Number.