Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 50)

WaveStation
44 922700-00 Rev A
Operation menus containing more parameters than the ones showing on
the first menu have a 1/X ↓ final selection. The additional menu(s)
therefore have a 2/X ↑ first selection. Press the adjacent button to
navigate additional menu(s) and parameter(s) as desired.
Press adjacent Operation buttons and use the Digital Input Front Panel
Controls to make specific adjustment/selection parameter choices.
Burst Operation menu selections and parameters include Period,
StartPhase, NCycle/Gated, Source, TrigOut, Cycles/Infinite, and Delay as
follows:

Period - This control is only available when NCycle is selected from the
third operation button. Press the Period operation button and provide a
specific value for the Pulse Period control using the detail dialog.

StartPhase - Press this operation button and provide a specific phase
value (in °) using the detail dialog to define the starting point of the
waveform. The phase varies from 0° to 360°, and the default setting is
0°. For an Arbitrary Waveform, 0° is the first waveform point.