Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 7)

Operator’s Manual
922700-00 Rev A 1
B
Welcome
Thank you for purchasing a Teledyne LeCroy WaveStation.
The WaveStation is a function/arbitrary waveform generator that allows
you to simultaneously create and view custom waveforms. You can control
WaveStation through USB-GPIB and/or USBTMC interfaces, and even
transfer waveforms to and from your WaveStation using the WaveStation
PC Software.
This WaveStation Operator's Manual covers how to use WaveStation
models 2012 10 MHz, 2022 25 MHz, and 2052 50 MHz. The material is
organized in the following manner:

Package Contents and Safety Requirements, along with the
Hardware and I/O description.

Getting Started with WaveStation, a general overview of the
standard controls on the front panel and how they correspond with
the display.

How to create Waveform Types, Modulated Waveforms, Sweep
Waveforms, and Burst Waveforms. Additional sections explain how
to use Save/Recall, Utility, and Help sections.

How to control WaveStation with USB-GPIB (using the USB-GPIB
Adapter) and/or USBTMC.

How to use the WaveStation Software to send and receive
waveforms over a PC connection with your WaveStation.

Reference, including where to find regularly updated Specifications
and other details.
We truly hope these materials provide increased comprehension when
using Teledyne LeCroy's fine products.
Sincerely,
David C. Graef
Teledyne LeCroy
Vice President and Chief Technology Officer