Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 28)

WaveStation
22 922700-00 Rev A
PLEASE NOTE THE FOLLOWING:

Press the Frequency/Period operation button a second time to select
and adjust the Period parameter in the same manner.

When using the Number Buttons to edit certain parameters, applicable
unit(s) are shown on the adjacent Units menu. Press a Unit menu button
to select the desired unit for your entry. These units do not appear if you
use the Adjustment Control knob to edit parameter settings.

Provide your desired Frequency or Period using the Digital Input Front
Panel Controls.
Amplitude/HLevel
With the Sine waveform and the Amplitude/HLevel operation button
pressed once, a Sine waveform is shown on the Waveform Display and
Amplitude is shown on the Waveform Detail dialog.