Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 63)

Operator’s Manual
922700-00 Rev A 57
B
NOTE: When selecting the Set to Default option button, your WaveStation is
restored to various factory settings as described in Restoring the Default Settings
(on page 59).
Make selections as desired and press the Done (to commit) option button
and the System menu is shown.

Test/Cal - Press this option button on the 2/2 main Util menu and
an additional menu with option buttons for SelfTest and SelfCal is
provided.
o Press the SelfTest option button and an additional menu is
provided where you can select a Scr(Screen)Test, KeyTest, or
LEDTest. After making your selection a corresponding screen is
shown where the number 7 or 8 front panel buttons are used
to either proceed with the test and/or exit the test screen,
respectively.
Screen Test
Keyboard Test