Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 14)

WaveStation
8 922700-00 Rev A
Front Panel
1. Power Button
2. USB Connector - USB 2.0 connector which is used for making USB-GPIB
or Memory Stick connections as explained in Controlling WaveStation
with USB-GPIB and/or USBTMC (on page 62) and Main Save/Recall
Operations (on page 46), respectively.
3. LCD Display
4. Display Menu Operation Buttons
5. Waveform Buttons - These buttons control the selection of Waveform
Types and Default Parameters.
6. Number Buttons
7. Function Buttons - When pressed, these buttons setup corresponding
Initial Function Settings. Specifically, the top three buttons are
Waveform Signal Conditioning buttons and apply Mod, Sweep, or Burst
functions to the waveform you've selected. Meanwhile, the lower three,
Save/Recall, Utility, and Help, are for various WaveStation tools and
configurations along with some Help information.
8. BNC Channel Outputs and Corresponding Control Buttons - The buttons
above the BNC connectors control the activation/deactivation of
corresponding channel outputs.
9. Direction Buttons
10. Adjustment Control Knob