Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 47)

Operator’s Manual
922700-00 Rev A 41
B
Second operation button press parameters are shown in reverse color on
the waveform detail dialog to provide a visual indication as to which
parameter is being adjusted in the detail dialog.
PLEASE NOTE THE FOLLOWING:

Some parameters look like they're first/second press shared and really
are not. Instead the parameter title is shown in the top portion and the
lower portion displays the particular parameter selection.

Operation menus containing more parameters than the ones showing
on the first menu have a 1/X ↓ final selection. The additional menu(s)
therefore have a 2/X ↑ first selection. Press the adjacent button to
navigate additional menu(s) and parameter(s) as desired.
Frequency sweep mode uses the WaveStation to sweep from the start
frequency to the stop frequency at a specified sweep rate.
Press adjacent Operation buttons and use the Digital Input Front Panel
Controls to make specific adjustment/selection parameter choices.