Teledyne LeCroy USB Chief - Users Manual - Manual (Page 84)

76
Chief User’s Manual CATC Version 1.7
Step 3 Click OK.
The Trace View is repositioned with the selected packet at the top of your
screen.
Go to Marker
To instruct the Analyzer to display a marked packet, follow these steps:
Step 1 From the Search menu, select Go to Marker to display the drop-down
menu listing the marked packets in that Trace View.
Step 2 Select the desired packet from the displayed list.
The Trace View is repositioned with the selected packet at the top of your
screen.
Note The Go to Marker feature functions in conjunction with the Set Marker feature.
The comments within the parentheses following each marked packet are added or
edited with the Set Marker feature. Please refer to Set Marker in Reading a
CATC Trace.
Go to
The Go To feature takes you directly to an event in a Trace.
Step 1 From the Search menu, select Go To under Search.
Step 2 Select the event you want to go to and enter the necessary information.