Teledyne LeCroy USB Chief - Users Manual - Manual (Page 35)

27
Chief User’s Manual CATC Version 1.7
Chapter 5: Recording Options
Use Recording Options to create and change various features that control the way
information is recorded by the USB Chief Analyzer.
From the Setup menu, select Recording Options.
OR
Click on the Tool Bar.
General Recording Options
The General Recording Options allow you to select or adjust the following
features:
Recording type
• Snapshot: Recording continues until the selected buffer size is filled.
Recording begins manually when you click on the Tool Bar.
Recording ends when the selected buffer size is filled.
• Manual Trigger: Recording continues in a circular manner within the limits
set by the buffer size.
Recording begins manually when you click on the Tool Bar.
Recording ends when you click on the Tool Bar or press the Manual
Trigger on the front of the Analyzer after a defined amount of data has been
recorded following the manual Trigger Event.