Teledyne LeCroy USB Chief - Users Manual - Manual (Page 106)

98
Chief User’s Manual CATC Version 1.7
Generating USB Traffic
Generating USB traffic using the USB Chief Analyzer is a two step process. First,
the traffic must be described in a free-form textual format. Once the text file input
is complete, the USB Chief application reads it in and generates the traffic on the
USB bus.
A Traffic Generation file contains free-form text and is named with a *.utg
extension.
Setting Up the Generator
Before you can generate traffic, you must assign memory and set power and
connection parameters.
Step 1 From the Setup menu, select Recording Options.
Step 2 Check Reserve Memory for Traffic Generation under Options on the
Recording Options General settings window.
Step 3 Click OK.
Step 4 From the Setup menu, select Power and Connection.