Teledyne LeCroy USB Chief - Users Manual - Manual (Page 31)

23
Chief User’s Manual CATC Version 1.7
USB Chief Program Startup
You can start the USB Chief program from the Desktop or from the installed
directory. The program always begins with its main screen active:
The software may be used with or without the Analyzer box. When used without
an Analyzer box attached to the computer, the program functions in a Trace
Viewer mode to view, analyze, and print captured protocol traffic.
Files created with the CATC Detective and CATC Inspector can also be viewed
with the Trace Viewer. Opening a file created with either of these Analyzers
displays a screen asking if you want to convert the old file to the new format under
the name convert.usb.
When the program is used with the USB Chief Bus & Protocol Analyzer attached
to the computer, you can monitor and analyze the activity of your USB branch
from the primary or secondary USB ports on the front of the Analyzer.
Starting the USB Chief Program from the Desktop
Step 1 Click Start.
Step 2 Select Programs.
Step 3 Select CATC.
Step 4 Click CATC USB Chief.
Starting the USB Chief Program from its Directory
Step 1 Go to the \CATC\USB Chief subdirectory.
Step 2 Double-click