Teledyne LeCroy USB Chief - Users Manual - Manual (Page 51)

43
Chief User’s Manual CATC Version 1.7
Color Display Options
Step 1 Click the Colors tab on the Display Options window.
Step 2 Use this menu to customize the colors associated with each field in the
Trace View. You can experiment with this option to achieve the color
combination best suited to a particular graphic system. A brighter color
might be appropriate for a specific field that should stand out in the
display (e.g. the PID Types).
Note The color of an Invalid Data (packet error) field cannot be changed; it is
permanently set to red.
Two color fields are provided for packet number displays to differentiate between
pre-Trigger traffic and post-Trigger traffic.
• The packet that causes the Trigger and all the packets before it are colored with
the - color.
• The packet that follows a Trigger is colored with the + color.
• All packets are colored with a + color when there is no Trigger.
Use the color buttons labeled + and - under the Packet # section of the Colors
screen to select a Trigger color.
To select or change a color, follow these steps:
Step 1 Click the appropriate color button.