Teledyne LeCroy USB Chief - Users Manual - Manual (Page 46)

38
Chief User’s Manual CATC Version 1.7
Step 2 Click Change Counter Value
Step 3 Enter an input value to tell the Analyzer how many times this event must
occur before it triggers a recording.
Step 4 Click OK.
You may connect as many Event buttons to a Counter as you like. However, the
Counter does not treat each event as a discrete specification but treats them all as
one event.
As an example, look at the specifications set in the following screen:
Counter 1 has been set to trigger four events after 15 occurrences. But the Counter
does not count 15 occurrences for EACH event. It counts ALL events as they
happen to occur until it reaches a total of 15 and then triggers.
Elastic Arrow
The Actions screen has a unique property, an elastic arrow that allows you to
maneuver easily between the Event buttons and the Actions buttons to set the
options that define the rules for data recording sessions. The arrow is anchored to
an Event button and attached to the mouse pointer on your screen; as you move
the mouse pointer, the arrow stretches to follow your movement
To use the arrow to connect an Event Group to an Action:
Step 1 Left-click on the Event button.