Teledyne LeCroy USB Chief - Users Manual - Manual (Page 38)

30
Chief User’s Manual CATC Version 1.7
Events Recording Options
The Event triggering and filtering options allow you to set specific parameters for
each Event Group. When an Event Group is selected, a field appears that allows
you to select specific conditions within the corresponding Event Group. As details
are selected, other Event Group details may fade since there are limited hardware
resources in the Analyzer. Information about the resources available is displayed
below the Event Group details. When a detail is faded, it is inactive and cannot be
selected. If an Event Group remains inactive, the current version of the application
or BusEngine does not support it.
Click the Events tab on the Recording Options window.
Packet Identifiers
Step 1 Select Packet Identifiers under Event Groups.
Step 2 In the Packet Identifier (PID) field, select up to two packet types to use
as a Recording Trigger.