Teledyne LeCroy USB Chief - Users Manual - Manual (Page 24)

16
Chief User’s Manual CATC Version 1.7
USB Chief System Setup
The USB Chief Analyzer functions with any personal computer using the
Windows 95 (OSR 2.1), Windows 98, Windows 98SE, or Windows 2000
operating systems and equipped with a functional USB interface. The Analyzer is
a stand-alone unit configured and controlled through a personal computer USB
port. It can be used with portable computers for field service and maintenance as
well as with desktop units in a development environment. It is easily installed by
connecting a cable between the computer’s USB port and the Analyzer’s USB
port.
15 OUT 3 – Signal output 34 Ground
16 OUT 4 – Signal output 35 Ground
17 OUT 5 – Signal output 36 Ground
18 GATED VP 37 Ground
19 GATED VM
Pin Signal Description Pin Signal Description