Generating traffic without a device connected, Opening a traffic generation file – Teledyne LeCroy USB Chief - Users Manual User Manual

Page 107

Chief User’s Manual

CATC

Version 1.7

The Power and Connection window appears.

Step 5

Select Detach under Host Connection.

Note

You must leave the Power and Connection window open while you generate
traffic. If you close the window, the Power and Connection settings revert to the
default (the Host Connection is attached), and you cannot generate traffic.

Generating Traffic Without a Device Connected

You can generate traffic without having a USB device connected to the Analyzer.

After completing the steps above, in the Power and Connection window

Step 1

Select Detach under Device Connection.

Step 2

Select D+ Pull Up under Internal Termination to record at Full Speed

Select D- Pull Up under Internal Termination to record at Low Speed.

Note

Leave the Current Measure in the default OFF setting while generating traffic.

Opening a Traffic Generation File

To open a Traffic Generation file,

Step 1

Select Open under File on the Menu Bar

Click

on the Tool Bar.