IAI America RCA-E - Manual (Page 47)

P. 44
8. Operation
8-11 End
Execute end in order to record each setting and save the content of the teaching pendant.
Please execute this end whenever disabling the Teach Port of the RC controller.
Operation:
1. Press the BEGIN/END for more than 2.5 seconds.
2. Move the cursor to “End,” and press the return key.
Afterwards, to remove, turn the controller port switch to OFF, then remove the Teach Pendant connector. You will
be able to reopen the connection from the initial screen by selecting “reconnect” and pressing down the return key.
Caution:
When multiple axes are connected with a controller link cable, after cycling power of a controller that is not
directly connected to the teaching pendant, please execute a reconnect.
Op. Start / End
* End ST= Efct
Op. Start / End
* End ST-Non
Home
Turn the RC Controller PORT Switch to OFF.
Then, remove the connector.
Op. Start / End
* Reconnection
In case data input ends, and the Easy Type
Teaching Box needs to be removed In case you reconnect and wish to reopen
from the Reset Screen.
Confirming Connection
IAI RC ST V. 1.00
Select Axis
* Axis No. 00
(in case of multiple axes connection)
Or
Mode Select A. 00
* Edit
(in case of single axis connection)
п