IAI America RCA-E - Manual (Page 25)

P. 22
The screen will turn into the Input Screen for Speed.
The default value will be utilized as is. Since other data will
use the default value, input for position number 0 will end here.
Next, position number 1 input will be executed.
Press the Key to advance position number to 1.
M D I N o. 0 0 A. 00
Speed 1 2 5 mm/s
8. Operation
M D I N o. 0 1 A. 00
Position A *
Input using position number 1
Position number 1
The screen will turn into the Input Screen for Position. Use the
Numeric Key to input 50 and then, press the Return Key.
M D I N o. 0 1 A. 00
Position A 50
M D I N o. 0 1 A. 00
Speed 100 mm/s
M D I N o. 0 1 A. 00
ACC•DEC 0.1 G
M D I N o. 0 1 A. 00
Push % 0 %
M D I N o. 0 1 A. 00
Range 0. 2mm
M D I N o. 0 1 A. 00
ACC MAX 1
M D I N o. 0 1 A. 00
ABS
0 INC
1 0
M D I N o. 0 2 A. 00
Position A
*
Input using position number 2
The screen will turn into the Input Screen for Speed. Use the
Numeric Key to input 100 and then, press the Return Key.
The screen will turn into the Input Screen for ACC • DEC.
Use the Numeric Key to input 0.1 and then, press the Return Key.
The screen will turn into the Input Screen for Push %.
The initial value will be utilized as is, so press the Return Key.
The screen will turn into the Input Screen for Range.
Use the Numeric Key to input 0.2 and then, press the Return Key.
The screen will turn into the Input Screen for ACC MAX.
Use the Numeric Key to input 1 and then, press the Return Key.
With the above, input for position number 1 is completed.
Next, we will execute input for position number 2.
Press the Key to advance position number to 2.
Position number 2