Editing the instrument’s lan settings – Agilent Technologies L4400 User Manual
Page 42
30
L4400 User’s Guide
2
Software Installation and Configuration
An example of the Web interface window is shown in Figure 2- 13.
Figure 2-13. L4450A Web Interface (Welcome Page).
Instruments on the network can be physically identified by selecting
Turn on Front Panel Identification Indicator within the Web
interface. This causes the instrument’s front panel LAN LED to flash
continually until Turn off Front Panel Identification Indicator is
selected.
Editing the Instrument’s LAN Settings
Once a communication path to the instrument has been opened, the
instrument’s LAN configuration can be viewed and modified using the Web
interface.
N O T E