Agilent Technologies L4400 - Manual (Page 102)

90 L4400 User’s Guide
3 Operating and Programming
Defining a Sequence
A sequence defines a series of SCPI commands with an associated name.
When the sequence is first defined, the commands are compiled and then
stored in a compressed format in non- volatile memory. The following
SCPI commands by L4400 LXI instrument are allowed in a sequence
definition (all other commands will generate an error).

L4421A / L4433A
ROUTe:ClOSe (@)
ROUTe:CLOSe:EXCLusive (@<ch_list>)
ROUTe:OPEN (@<ch_list>)
ROUTe:OPEN:ABUS [{1-4|ABUS1-ABUS4|ALL}]
ROUTe:OPEN:ALL [{1|ALL}]
ROUTe:MODule:WAIT {1|ALL}
ROUTe:SEQuence:TRIGger[:IMMediate] <name>
SYSTem:DELay[:IMMediate] <time>
ABORt
L4437A
ROUTe:ClOSe (@)
ROUTe:CLOSe:EXCLusive (@<ch_list>)
ROUTe:OPEN (@<ch_list>)
ROUTe:OPEN:ALL [{1|ALL}]
ROUTe:MODule:WAIT {1|ALL}
ROUTe:SEQuence:TRIGger[:IMMediate] <name>
SYSTem:DELay[:IMMediate] <time>
ABORt
Sequence Management
ROUTe:SEQuence:CATalog?
ROUTe:SEQuence:DELete:ALL
ROUTe:SEQuence:DELete[:NAME] <name> Returns list of defined sequence names.
Deletes all sequences from memory.
Deletes specified sequence from memory.
Alarm Limits
OUTPut:ALARm{1-2}:SEQuence?
ROUTe:SEQuence:TRIGger:SOURce <name>,
<source>
ROUTe:SEQuence:TRIGger:SOURce? <name> Returns sequence associated with alarm.
Assigns trigger source to sequence.
Returns trigger source currently selected.