Avaya Media Gateway G350 - Manual (Page 87)

Avaya G350 Manager User Guide 77
WAN Configuration
Creating, Editing, and Deleting Channel Groups
To create a new channel group, click Wizard in the Channel Groups table.
The Channel Group Wizard starts.
To edit a channel group:
1. In the Channel Groups Table, select the channel group which you
wish to edit.
2. Click Wizard . The Channel Group Wizard starts. The screens in the
Channel Group Wizard display the parameters for the selected
channel group.
To delete a channel group:
1. In the Channel Groups Table, select the channel group which you
wish to delete.
2. Click Delete . A confirmation box opens.
Status The status of the PPP or Frame Relay
interface. Possible values are:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
Table 7-7. Channel Groups Table Parameters (Continued)
Field Description