Avaya Media Gateway G350 User Manual
Page 180
Chapter 16
170
Avaya G350 Manager User Guide
You can create or delete ARP table entries. For more information on
editing tables, refer to
.
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
1. Click .
Or
Select
Action >
Start Point
. The Start Point dialog box opens.
Figure 16-6. ARP Table Start Point Dialog Box
2. Enter an IP address in the
IP Address
field.
3. Select an interface from the
If Name
listbox.
4. Click
OK
. The ARP Table displays entries starting with the specified
IP address and interface.
To view all the entries in the ARP Table:
Click .
Or
Select
View >
Refresh
. All entries appear in the table.
Status
The status of the interface. Possible status values
are:
•
Dynamic
- The entry is learned from the
ARP protocol. If the station entry is not
active for a predetermined time, the entry
is deleted from the table.
•
Static
- The entry has been configured by
the network management station and is
permanent.
•
Invalid
- The entry in the table is invalid.
Table 16-4. ARP Parameters (Continued)
Field
Description