Avaya Media Gateway G350 - Manual (Page 38)

Chapter 3
28 Avaya G350 Manager User Guide
Auto Negotiation
Mode The configured state of the Auto-Negotiation
protocol between two stations. When enabled,
Auto-Negotiation detects the highest common
denominator for communication between
endstations, and sets both to the same highest
common setting. It also delivers remote link
status.
For 10BaseT and 100BaseT ports,
Auto-Negotiation determines the speed and
Duplex Mode of communication between the
endstations. For Gigabit ports, Auto-
Negotiation determines the Flow Control
setting of the ports.
For more information, refer to Auto-Negotiation
in The Reference Guide.
Auto Negotiation
Status The operational state of the Auto-Negotiation
protocol between two stations. Possible
statuses are:
• Pass - The Auto-Negotiation protocol is
enabled and a common protocol has
been established.
• In progress - The Auto-Negotiation
protocol is in the process of detecting the
communication capabilities of the
endstations and setting them to the
highest common denominator.
• Fail - The Auto-Negotiation protocol was
not able to detect the communication
capabilities of the end station, or was
unable to set them to the highest
common denominator.
• Disabled - The Auto-Negotiation protocol
is disabled.
Duplex Mode The state of communication of the selected
port. Possible values are:
• Full Duplex - The port can send and
receive simultaneously.
• Half Duplex - The port can either receive
or send, but cannot do both
simultaneously.
Table 3-3. Module Configuration Dialog Box (Continued)
Field Description