Micromod MOD: MODCELL Application Builder Software - Manual (Page 92)

Application Builder
APPENDIX A
Filename .CRF = Cross reference data base file for the strategy after the
COMPILE activity is completed with or without errors. This
is an ASCII file of the block occurrence number assigned
during compile and the block tag entered during
configuration. This file is produced in execution order. You
can use the DOS sort command or your other favorite utility
to arrange this file in some other sorted order.
Filename
= Instrument Tag Name.
Filename .MRF = Modbus reference data base file for the strategy after the
COMPILE activity is completed without errors. This is an
ASCII file of the register, data type and attributes specified
in ML blocks and sent to an MSC block.
Filename = Instrument Tag Name.
Filename .CSM = Compound submenu data base file for a selected
compound after the SAVE COMPOUND activity is invoked.
Filename = Compound Tag Name.
Filename .RPT = Report data base file when a database report is written to
disk.
Filename = Strategy Name.
Filename .DXF = AutoCAD data base file when an Export to DXF report is
written to disk.
Filename = Strategy Name at system level,
instrument name at instrument level, loop name at loop
level and compound name at compound level.
Filename .LOG = A log file of all communication messages produced during
any PC to link or Extended Modbus communications if the
log file option is YES in the communication setup menu.
This is a readable file and is mainly for engineering debug
use.
Filename = Instrument Tag Name.
Filename .SD1 = Shutdown information file produced when shutdown
information is read from the status page and when the log
file option is YES. As of version 4.00 this is a readable file
(not readable before) and is mainly for engineering debug
use.
Filename = Instrument Tag Name.
PREF.CFG = Strategy preference file after saving preferences.
Filename .WDF = Wiring Description file which contains the tag name, block
type and occurrence number, block description, wiring
description and slot number(s) for each I/O module block.
Filename = Instrument Tag Name.
A-2