Micromod MOD: MODCELL Application Builder Software User Manual

Page 66

Text mode
Original mode

Application Builder

CONFIGURATION

Figure 5-1. Instrument Level Display

Define parameters for Interface and System Event blocks (Section 5.3).

NOTE: The data for any configurable field is described in the data base

reference book and a database report can be sent to your printer as
described in Section 4.13.1.

Make I/O and communication module block selection choices and configure
block displays (Section 5.4).

I/O and communication module blocks are not part of a loop scan group.
I/O module blocks can be placed anywhere in an instrument strategy.
The ICN and MSC communication module blocks are available outside of
loop compounds only and are placed somewhere at the instrument level.
When assigning tag names, it may be helpful to use the slot number in
the I/O block names (e.g., DIM1).

5-2