Fluid Components International GF03 - Manual (Page 51)

Doc. No. 06EN003352 Rev. B 4 7 Model GF03 Flow Meter
FLUID COMPONENTS INTERNATIONAL LLC http://www.fluidcomponents.com
Note: Any unauthorized repair attempts will void the warranty.
At this time FCI does not consider there to be any field-repairable items with the exception
of the replacement of fuses F1 and F2. Any repair at the component level for either the flow
elements and enclosure or the flow transmitter and attached components is not advised or
recommended by FCI.
Contact the authorized FCI field representative (see list of regional territories and the
respective agents) or FCI (see telephone and FAX numbers in the front of this manual) to
determine the best course of action.
Before returning any equipment to FCI, obtain a return authorization number (see Appendix
C) for authorization, tracking, and repair/replacement instructions. Remove the defective
instrument, replace with a spare, calibrate, and return the defective instrument to FCI freight
prepaid for disposition.
FCI typically recommends a flow element and a flow transmitter assembly, depending on how
critical the monitoring process is.
Spare parts should be kept above grade and indoors. Keep the instrument dry. Add desiccant
and enclose in plastic wrap for extended storage periods. There is no predetermined shelf life;
reinspect at six month intervals.
If problems or questions exist regarding the flowmeter, please contact the regional or country
authorized FCI Field Agent (manufacturer's representative). There is an extensive list of these
representatives at the front of this manual. If additional technical assistance is required,
contact the FCI Customer Service Department at 1 (800) 854-1993 toll free.
Refer to Appendix C for specific customer service policy and procedures.
Repair
Defective Parts
Spares
Storage Information
Customer Service