Fluid Components International CMF Series Manual Installation of Electronics - Manual

In
st
allation of signal con.
Fluid Components Intl
Document 06EN003327 Rev. - 31 FlexCOR
™
Model CMF Series
5.1 Compact
(Integral)
IP 67
version
Remove and discard the terminal box cover of
the sensor.
1
2
3
Fit the Pg 13.5 cable glands for the supply and
output cables. (13.5 X 1/2 NPT adapters are
supplied with each unit. FCI part number
017945-01).
Fit the supply and output cables respectively
and tighten the cable glands to obtain optimum
sealing.
Please see the wiring diagram for the "Electrical
connections".
Mount the signal converter on the terminal box.
5. Installation of Transmitter