Fluid Components International 8-66B_12-64B Series Manual CE Conformance - Manual

Doc. No. 06EN003264 Rev. A D - 1 Models 12-64/8-66 Basic Switch
APPENDIX D - CE Conformance FLUID COMPONENTS INTL
Approved CE marking 12-64 and 8-66 Configurations
Approved Options
1) all insertion U-lengths
2) all specified application combinations
3) 115/230 VAC power input.
Approved Part Numbers
Conditionally Approved CE marking - 24 VDC Factory Selectable Options
Input power of 24 VDC may be optionally selected. Since the manufacturer does not supply the power source or
transformer for these connections, the responsibility for the conditioning of these sources and associated compliance
to the EMC Directive shall be the responsibility of the user.
Appendix D. CE Conformance
1 2 3 4
12-64-4
or
12-64B
All options conform to CE marking
requirements.
X Y X or Y options only conform to CE marking
All other configurations must be approved for CE marking conformity by FCI's Engineering Department.
1or 2 B
1 2 3 4
8-66
or
8-66B
All options conform to CE marking
requirements.
X Y X or Y options only conform to CE marking
All other configurations must be approved for CE marking conformity by FCI's Engineering Department.
1or 2 B