Dynasonics TFX Ultra Transit Time Flow Meters - Manual (Page 64)

Flow
ON (Value)
Sets value at which the alarm output will switch from OFF to ON.
OFF (Value)
Sets value at which the alarm output will switch from ON to OFF.
50
Off < Gal/M
350
On> Gal/M
Mode:
F l o w
Control 1
Figure 47: Control output set for flow
Signal Strength
ON (Value)
Sets value at which the alarm output will turn ON.
OFF (Value)
Sets value at which the alarm output will turn OFF.
5
Off <
3
On>
Mode:
Si g Str en g th
Control 1
Figure 48: Control output set for signal strength
Errors
Alarm outputs on any error condition. See Error Codes .
BASIC TAB
Page 64 March 2014