B&K Precision 2552-2559 - Programming Manual - Manual (Page 8)

8
measure.
OFST OFFSET ACQUISITION
Allows output channel
vertical offset adjustment.
*OPC *OPC STATUS
Sets the OPC bit in the
Event Status Register
(ESR).
*OPT? *OPT? MISCELLANEOUS
Identifies oscilloscope
options.
PACL PARAMETER_CLR CURSOR
Clears all current
parameters in Custom,
Pass/Fail.
PACU
PARAMETER_CUSTO
M
CURSOR
Controls parameters with
customizable qualifiers.
PAVA?
PARAMETER_VALU
E?
CURSOR
Returns current parameter,
mask test values.
PDET PEAK_DETECT ACQUISITION
Switches the peak detector
ON and OFF.
PERS PERSIST DISPLAY
Enables or disables the
persistence display mode.
PESU PERSIST_SETUP DISPLAY
Selects display persistence
duration.
PNSU PANEL_SETUP SAVE/RECALL
Complements the
*SAV/*RST commands.
PFDS PF_DISPLAY FUNCTION
Enables or disables to
display the test and the
message options of
pass/fail.
PFST PF_SET FUNCTION
Sets the X mask and the Y
mask.
PFSL PF_SAVELOAD SAVE/RECALL
Saves or recalls the
created mask setting.
PFCT PF_CONTROL FUNCTION
Selects the “operate”,
“output” and the “stop on
output” which are the
options of pass/fail.
PFCM PF_CREATEM FUNCTION
Creates the mask of the
pass/fail.
PFDD PF_DATEDIS FUNCTION
Return the number of the
pass/fail monitor which
can be displayed on the
screen.
*RCL *RCL SAVE/RECALL
Recalls one of five non-
volatile panel setups.
REC RECALL WAVEFORMTRANS
Recalls a file from mass
storage to internal
memory.